Proceed to basket here.
Sizing information is provided by the manufacturer. Please use the sizes shown as a guide only.
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Sizing information is provided by the manufacturer. Please use the sizes shown as a guide only.
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Sizing information is provided by the manufacturer. Please use the sizes shown as a guide only.
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Sizing information is provided by the manufacturer. Please use the sizes shown as a guide only.
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Was £699.00
Now £479.99
SKU: 981070422
Part Number: 981070422
Was £699.00
Now £479.99
SKU: 981070423
Part Number: 981070423
Was £699.00
Now £479.99
SKU: 981070424
Part Number: 981070424
Was £699.00
Now £479.99
SKU: 981070425
Part Number: 981070425
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
Produced by Arai, it is specific for sporty riding. Drudi Performance graphics highlight the Tricolore, symbolizing Ducati’s Italian identity - Outer shell in SNC2 (Structural Net Composite) fiber, which combines strength to protect against impact and a smooth texture to dissipate impact energy. It is available in 5 sizes (ECE) - Outer shell reinforced with the "Peripherally Belted" construction, a patented fiber reinforcement band positioned along the top of the eye port - Patented EPS inner shell with different densities characterized by areas that are more or less compact depending on the position - Visor system with VAS technology (variable axis system) to give a wide field of vision when riding at any lean angle - Visor opening mechanism derived from the automobile industry, optimized ventilation for maximum stability and efficiency at high speeds and detachable interior made of high-quality hypoallergenic fabric
Outside PB-SNC2 (Structural Net Composite) shell that adds rigidity to the resin in the different layers of fibers and strengthening materials inside the shell Peripherally Belted SNC Shell: a belt laid peripherally on the top of the eye-opening of the shell, increasing its rigidity
Inside Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Emergency Release Cheek Pads: both cheek pads and the neck roll can be removed in seconds thanks to the advanced Emergency Release System. Rescue and medical workers can easily remove the newly designed removable neck roll and the cheek pads by just pulling the pad release tabs. This offers extra room within the helmet, making removal of the helmet much easier and minimizing the risk of additional injury Removable interior in Eco-Pure® fabric with very limited frame area
Visor Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model
Plus Arai Side Air Channel (ASAC). Air suction from eye port to side duct Racing closure with D-ring fastening, with button to secure the strap Diffuser with improved aerodynamics for high speed stability and drag Side Duct 6 with aerodynamic edge to improve high speed stability Replaceable Vented Neck roll. Easily removed and re-installed for thorough washing or replacement. With neck exhaust to enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet Top ventilation IC duct 5 with improved air flow efficiency by 11% compared to previous model Ventilation with new slide shutter: reduced wind noise, improved durability and waterproofing
Linea prodotto Ducati Corse
Composition Fiber Composite fibres
A41 Bicester Road
Westcott
Buckinghamshire
HP18 0JX
Phone Number
01296 655999General Email
info@onyerbike.netMonday to Friday: 9.00am - 5.30pm
Saturday: 9.00am - 5.00pm
Sundays: Closed
Bank Holidays: Closed
Financial Disclosure
On Yer Bike Ltd are a credit broker and not a lender. We are Authorised and Regulated by the Financial Conduct Authority. FCA No: 538555 Finance is Subject to status. Other offers may be available but cannot be used in conjunction with this offer. We work with a number of carefully selected credit providers who may be able to offer you finance for your purchase.
Registered in England & Wales: 03330236
Registered Office: Address: Verna House 9 Bicester Road, Aylesbury, Buckinghamshire, HP19 3AG
Data Protection No: ZA118827
Our website uses 7 main cookies. A cookie is a small file of letters and numbers that we put on your computer if you agree. These cookies allow us to distinguish you from other users of our website, which helps us to provide you with a good experience when you browse our website and also allows us to improve our site. The cookies we use are "analytical" cookies. They allow us to recognise and count the number of visitors and to see how visitors move around the site when they are using it. This helps us to improve the way our website works, for example by ensuring that users are finding what they are looking for easily. Read more about the individual cookies we use and how to recognise them by clicking here.
By clicking 'Accept', you agree to the storing of cookies on your device to enhance your browsing experience and for analytical purposes. By clicking ‘Reject’, only essential necessary cookies will be stored on your device.